EPEVER SOLAR CHARGE CONTROLLER Set up: TRACER AN SERIES CONTROLLE

EPEVER SOLAR CHARGE CONTROLLER Set up: TRACER AN SERIES CONTROLLE

Blog Article

The EPEVER Tracer AN Series Solar Cost Controller is really a hugely economical photo voltaic controller designed for off-grid solar methods. Based upon multiphase synchronous rectification technologies, it guarantees optimized energy conversion and method balance for a wide array of photovoltaic (PV) apps.

Critical Options of the EPEVER Tracer AN Sequence Controller
The Tracer AN series makes use of EPEVER Solar Demand Controller technological innovation for top-quality solar Vitality harvesting. Crucial characteristics include:

Multiphase Synchronous Rectification (MSR) for enhanced Vitality conversion.
State-of-the-art MPPT Algorithm with >ninety nine% efficiency.
Twin-Phase Charging for Increased battery daily life.
Liquid crystal display Display screen with actual-time knowledge checking.
Various Load Handle Modes including guide and timer.
Detailed Digital Protections towards overcharging, above-discharging, short circuits, and reverse polarity.
Action-by-Step Manual to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Getting ready the Controller
Make certain all components are integrated: Tracer AN device, temperature sensor, interaction cables, and consumer handbook.
Confirm the model number and voltage rankings match your photo voltaic panel and battery technical specs.
two. Mounting the Charge Controller
Pick a properly-ventilated, dry area near to the battery bank.
Secure the Tracer AN controller using the supplied mounting brackets.
Maintain good clearance for warmth dissipation.
three. Wiring the Solar Cost Controller
Caution: Usually stick to appropriate security protocols and make sure the program is driven off prior to connecting factors.

Stage one: Connect the battery terminals for the charge controller (favourable to good, unfavorable to destructive).
Action 2: Connect the solar panel array into the PV enter terminals.
Action 3: Join the load terminals if utilizing a direct load link.
Action 4: Double-Look at all connections for polarity and tightness.
4. Configuring the Controller Settings
Power over the controller by connecting the battery very first.
Use the Liquid crystal display Screen to navigate the options menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Handbook, timer, light-weight Handle.
five. Monitoring and Info Logging
The Tracer AN Collection supports true-time checking utilizing the MT50 remote meter.
Information could be logged through the RS485 visit here interaction port applying software program for instance Solar Station Personal computer.
Distant checking is possible With all the EPEVER WiFi module.
six. Troubleshooting Prevalent Issues
Situation one: No Energy Output

Check out battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Challenge two: Over-Voltage Safety

Validate the photo voltaic array’s voltage rating.
Alter procedure parameters if required.
Challenge 3: No Battery Charging

Inspect PV wiring for continuity.
Confirm MPPT settings while in the menu.
Great things about the Tracer AN Sequence with MSR Technologies
The multiphase synchronous rectification know-how ensures:

Greater Effectiveness: Minimized energy losses for the duration of conversion.
Increased Reliability: Stable overall performance under variable loads.
For a longer time Battery Daily life: Reliable and precise charging profiles.
Summary
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification technologies is definitely an Extraordinary option for optimizing solar energy era and lengthening battery everyday living. By following the above setup guide, customers can make certain optimum efficiency and procedure longevity.